33t National 14110 Boom Truck Crane

NATIONAL 1400 Controls: Swing Boom: 4 Section - 110' Jib: 2 Section - 30'-54' Single Hoist Outriggers: 2 Stage O&D Outrigger Pads: Alum.  Front Stabilizer 360 Degree Stable Rigging/Block: 1 Hook Block, 2 Man Basket Cab-Heat: Diesel Cab-Access Ladders: Under Cab PETERBILT 357 Year: 2004 Cab: Standard Color: White Miles: verify Engine Hours: verify Engine Make: Cat Engine Horse Power: 475 Engine Exhaust Brake: 3 Stage Engine Exhaust: Dual Vertical Engine Block Heater Engine Battery: 12V Under Cab Axle/Drive Config.: 6x4 Tandem GVW: 66,000 Contact Seller

3.5t Palfinger PK 22000EL Boom Truck Crane

Palfinger PK 22000EL Steel Hauler Special, 1993 Kenworth T800 Truck Boom Truck - Stand Up Unit #: 3763U Capacity: 7,055 Lbs Reach: 55 Feet Engine Manufacturer: Cummins Engine Model: L-10 Truck Year: 1993 Price: $29,900.00 Palfinger PK 22000EL Steel Hauler: Rear mount Hydraulic reach to 54’8” capacity at full hydraulic reach 2,160# Manual extensions to 89’2” capacity at full reach 685# Single station control station at rear of truck With boom mounted winch Boom carries horizontal over truck cab Hydraulic out and down rear stabilizers 1993 Kenworth T800 equipped as follows:    L-10 Cummins engine   RTO... Contact Seller

5t UNIC Revolution 84RM Boom Truck Crane

REVOLUTION 84RM by Smiley Lifting Solutions:  Non-CDL Single-Axle Truck with a Rear Mounted 84' Reach Crane This is a low profile 84' tip height crane that is rear mounted on a non CDL 26,000 GVW truck and and you still have a 4,000 lb payload! This is a short wheel base truck (185" WB) that makes it easy to manuever and set-up. Turning radius is very tight!  The crane can be mounted on your choice of truck (which meets manufacturer's minimum specification requirements).  Over all length from front bumper to rear bumper is only 26'.  This is the perfect combination for tight work areas, driving into residential yards, parking lots, driveways, A/C Work... Contact Seller

UNIC Revolution 84RM 5-Ton Boom Truck Crane

REVOLUTION 84RM by Smiley Lifting Solutions:  Non-CDL Single-Axle truck with a Rear Mounted 84' Reach Crane This is a low profile 84' tip height crane that is rear mounted on a non CDL 25,999 GVW truck and and you still have a 4,000 lb hauling capacity! This is a short wheel base truck (180" WB) that makes it easy to manuever and set-up. The crane can be mounted on your choice of truck (which meets manufacturer's minimum specification requirements).  Over all length from front bumper to rear bumper is only 25'.  CRANE: USED REVOLUTION 84RM by Smiley Lifting Solutions Low Profile Stowed Boom Dual Operator's stations  6-Sided Keeled... Contact Seller

5t UNIC Revolution 84RM Boom Truck Crane

CRANE: USED REVOLUTION 84RM by Smiley Lifting Solutions Low Profile Stowed Boom Dual Operator's stations  6-Sided Keeled Boom Design  84' Tip Height 10,000 lb. Capacity Hi-Speed Winch  Continuous Rotation Overload Protection 4 Out and Down Outriggers 12' Steel HD Deck TRUCK: USED 2014 Kenworth T270 (non-CDL) Cummins ISB 240 HP Diesel w/ 660 Ft. Lb. Torque ALLISON 2500 6-Speed Automatic Transmission 8,500 lbs. Front Axle air Conditioning AM/FM/CD Stereo  Power Window/Door Locks All Standard and Necessary Equipment Contact Seller

5t UNIC Revolution 84RM Boom Truck Crane

NEW REVOLUTION 84RM by Smiley Lifting Solutions: Non-CDL Single-Axle truck with a Rear Mounted 84' Reach Crane This is a low profile 84' tip height crane that is rear mounted on a non CDL 25,999 GVW truck and and you still have a 4,000 lb hauling capacity! This is a short wheel base truck (180" WB) that makes it easy to manuever and set-up. The crane can be mounted on your choice of truck (which meets manufacturer's minimum specification requirements). Over all length from front bumper to rear bumper is only 25'.     CRANE: NEW REVOLUTION 84RM by Smiley Lifting Solutions Low Profile Stowed Boom Dual Operator's stations  6-Sided Keeled... Contact Seller

5t UNIC Revolution 84RM Boom Truck Crane

REVOLUTION 84RM by Smiley Lifting Solutions: Non-CDL Single-Axle Truck with a Rear Mounted 84' Reach Crane This is a low profile 84' tip height crane that is rear mounted on a non CDL 26,000 GVW truck and and you still have a 4,000 lb payload! This is a short wheel base truck (185" WB) that makes it easy to manuever and set-up. Turning radius is very tight!  The crane can be mounted on your choice of truck (which meets manufacturer's minimum specification requirements).  Over all length from front bumper to rear bumper is only 25'.  This is the perfect combination for tight work areas, driving into residential yards, parking lots, driveways, A/C Work, Sign... Contact Seller

UNIC Revolution 84RM 5-Ton Tree Pro Boom Truck Crane

REVOLUTION 84RM by Smiley Lifting Solutions: Non-CDL Truck with a Rear Mounted 84' Reach Crane/Man Basket, 10,000 LB. Lifting Capacity This is a low profile 84' tip height crane and man lift that is rear mounted on a non-CDL 25,999 GVW truck with a 4,000 lb payload! This is a short wheel base truck (185" WB) that makes it easy to manuever and set-up in tight confined areas. Turning radius is very tight!  The crane can be mounted on your choice of truck (which meets manufacturer's minimum specification requirements).  Over all length from front bumper to rear bumper is only 25'.  This is the perfect combination for tight work areas, driving into residential... Contact Seller

UNIC Revolution 84RM 5-Ton Boom Truck Crane

REVOLUTION 84RM by Smiley Lifting Solutions:  Non-CDL Single-Axle CabOver Truck / Rear Mounted 84' Crane **The only rear mounted boom truck offered that requires NO Commercial Driver's License and has an 84 ft. Reach and is mounted on a CABOVER truck!! This is a low profile 84' tip height crane that is rear mounted on a non CDL 26,000 GVW truck and and you still have upt to a 4,000 lb payload! This cabover truck is a short wheel base that makes it easy to manuever and set-up. Turning radius is very tight!  This is the perfect combination for tight work areas, driving into residential yards, parking lots, driveways, A/C Work, Sign Work, Tree Work, etc. CRANE: ... Contact Seller

UNIC Revolution 84RM 5-Ton Boom Truck Crane

REVOLUTION 84RM by Smiley Lifting Solutions:  Non-CDL Single-Axle Truck with a Rear Mounted 84' Reach Crane This is a low profile 84' tip height crane that is rear mounted on a non CDL 26,000 GVW truck and and you still have a 4,000 lb payload! This is a short wheel base truck (185" WB) that makes it easy to manuever and set-up. Turning radius is very tight!  The crane can be mounted on your choice of truck (which meets manufacturer's minimum specification requirements).  Over all length from front bumper to rear bumper is only 25'.  This is the perfect combination for tight work areas, driving into residential yards, parking lots, driveways, A/C Work... Contact Seller

National 455 8-ton Boom Truck Crane

18' Bed, 4 hydraulic A-frame outriggers and 28,000 GVW. Contact Seller

National 437A 10-ton Tractor Mount Boom Truck

Mounted on 2000 INTERNATIONAL 4900 Crew cab truck with National 400A Series (437A) 10 ton, 37' main boom, 18k front axle, 44k rears, 254" wheelbase, 15' 6" x 94" deck. Stock number: 3979 Color: White Doors: 4 Fuel Type: Diesel Drive Train: 6x4 Engine: IH DT466 Transmission: Manual Horsepower: 250 Contact Seller

National 437A 10-ton Boom Truck Crane

 Cruise, AC, double frame, front tires, Chalmers suspension, 11R22.5 tires Contact Seller

1989 NATIONAL 400A R1662X

National 400A, 10 USt, Rear Mount Stand up to Operate Crane, 37' Main Boom, Wood Deck. Mtd on a Paystar 5000 F-5070, Detroit Diesel Model 6VF160129, 8LL trans, 56,000 lb GVW. 150 Fuel Capacity. 2HTTTDVR6KC013762 367,896 KM Contact Seller

10t National 456A Boom Truck Crane

The 456A is part of the National 400A Series Boom Truck line.   Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details. Contact Seller

10t National 456A Boom Truck Crane

Crane Specifications: - 56 Ft Main Boom - 18 – 29 Ft Jib - A-Frame Front Outriggers - A-Frame Rear Stabilizers - Parallel Boom Rest - 16 Ft Wood Deck - HAS / A2B - Overhaul Ball Truck Specifications: - 2001 GMC Topkick C6500 NON CDL - VIN #: 1GDJ7H1C81J502835 - 3126 Cat Diesel Engine - 6 Speed Manual Transmission - 9,000 lb Front Axle Weight Rating - 19,000 lb Rear Axle Weight Rating - Air Conditioning / Heat - Approximate Miles: 61,616 Miles Contact Seller

Terex BT2047 10-Ton Boom Truck Crane

2018 TEREX BT2047 with 2 year warranty Capacity 10T Main Boom Length 47' Max Height 91'9" Max Boom Extension 77' Overall Length 30' Call Us for Pricing. Contact Seller

1980 Simon RO TC110-55 11-Ton Boom Truck Crane; CranesList ID: 109

55’ 3-Section Full-Power Boom, No Jib, Main Winch, 9/16” Wire Rope, Boom Rest, Hook Block and Ball, Mounted behind the cab of a 2002 International 4900 6 X 6 tandem axle truck w/ side rail frame around above the deck and diamond plate steel bed, DT466E Diesel Engine, 10-speed Manual Transmission, Super singles rubber w/ 75-85% Left, Aluminum wheels, 6 X 6 switch flip over in truck cab, Hendrickson Heavy Duty suspension, Double frame, Tool and Rigging Boxes, Pintle hitch, Four “A” Type Outriggers, New Batteries, Original Hours and Miles, New batteries and recent service, Crane has not been California DMV registered in 4 years ... Contact Seller

RO Stinger 110-55 11-Ton Boom Truck Crane

2004 Ford F750 with a Reconditioned Terex 110-55 boom on it. Unit as full DMF rail gear for those rail applications.  Contact Seller

12t JLG JGGB1175 Boom Truck Crane

62 FOOT 3 SECTION WITH 18-25 FOOT EXTENSION MILES: 19,200 FORD F700 28,000 GVW FORD DIESEL  5 SPEED TRANS. 2 SPEED REAR AXLE 18 FOOT BED  11 R 22.5 WHEELS & TIRES 5 TON BALL 10 TON 1 SHEAVE HOOK BLOCK STORAGE BOX OUTRIGGER PADS OWNERS MANUAL CURRENT INSPECTION  COMES WITH PALLET FORKS & DUMP BOX Contact Seller

12t Simon-Ro TC-125-1 Boom Truck Crane

Crane Specifications: - 48'  telescoping main boom - 15 ton Two and three part line block - Boom rest - 18’ wood floor deck - Electronic back up alarm (BUA) - Rear bumper - A frame front outriggers - Dual operator consoles - LMI with anti-two block system - Rear out and down stabilizers   Truck Specifications: - 1990 International  model 330 - IH466 International Diesel Engine - Approximate miles: 167,712 (11/16/ Contact Seller

National Series 600 model 656 Boom Truck Crane on Ford L8000

Includes Waking Beam Suspension and 35' jib extension. Contact Seller

RO PJ-400 12.5-Ton Boom Truck Crane on Federalist - CranesList ID: 248

1986 Simon RO-Federal Truck Chassis PJ400, 12.5 Ton, Boom Truck Crane; CranesList ID: 248, 50' Three Section Full Power Boom, No Jib, Main Winch, One sheave Hook Block, Hydraulic Powered Winch Option on the front of the Truck Cab, Crane Operators Seat is on Top of the Crane Pedestal giving Great Visibility, Operator Seat and Controls Swing with the Boom for Greater Crane Safety, Operators Position has Engine Start & Stop Switches and a Horn, Rear Mounted with a riders seat on a Federal Fire Tandem Axle Truck chassis with four man cab,  Detroit GM 6V71 Diesel Engine, Allison Five Speed Automatic Transmission, Front and Back Tires: - To Be Confirmed At ... Contact Seller

National 666A 12.5-Ton Boom Truck Crane; CranesList ID: 213

1990 National-Ford 666A, 12.5 ton,  Boom Truck; CranesList ID: 213, 25' - 66' Three Section Full Powered Boom, 42’ Two section Jib, Main Winch with 9/16" wire rope, Anti-Two Block, Dual Controls, Boom Rest,  Mounted behind the cab of a to be determined make/model Two Axle Truck, Perkins C6-354/4 Diesel Engine,  5 speed manual transmission with dual, A Frame outriggers in front and rear, Tool Box http://www.CranesList.com LOCATED IN MEXICO! Contact Seller

1991 National 556B 12.5-Ton Boom Truck Crane; CranesList ID: 212

56' 3-Section Full-Power Boom, No Jib, Main Winch w/ 9/16 Rotation Resistant Wire Rope, 2 Speed, 12-Ton Single-Sheave Hook Block, Mounted Behind The Cab Of A 1990 Ford F600 Two Axle Truck with a steel bed, Ford 7.8 Diesel Engine, Spicer Stick Shift  Transmission, Optional Dual Differential Hydraulic Brakes, Front And Rear Tires: 11 R X 22.5, Certified, http://www.CranesList.com Contact Seller

1989 National 556B 12.5-Ton Boom Truck Crane; CranesList ID: 89

56' 3-Section Full-Power Boom, No Jib, Main Winch w/ 9/16" Rotation Resistant Wire Rope, 2 Speed, Hook Block, Mounted Behind The Cab of a 1990 Ford F800 2-Axle Truck VIN 1FDJ84POKVA34343 w/ 20' Wide Steel Bed, 6.6L 6 Cylinder 170 HP Diesel Engine, 5 X 2 Spicer Stick Shift  Transmission, Front And Rear Tires: 1000R-20, Spring Suspension, http://www.CranesList.com Contact Seller

National Series 300B model 346B Boom Truck (Unmounted-Crane Only)

National Series 300B (Model 346B) Rear Mounted Boom for Sale.  We are selling the crane only and will separate after purchase.  Crane is in great working condition.  Contact Seller

13t National 566B Boom Truck Crane

National Crane 566B, 42' Jib, 1991 International Boom Truck - Stand Up Unit #: 4127U Capacity: 13 Tons Reach: 118 Feet Engine Model: DT466 Truck Year: 1991 Price: $25,900.00 National Crane 500B: 12.5 ton capacity 66' boom - 76' tip height 25'-42' side-stow jib - 118' max tip height 18' wood bed Two 36” x 24” x 24” aluminum toolboxes One 48” x 24” x 24” aluminum toolbox 1991 International 4900: 31,000# GVW DT466 engine - 210 hp 5 speed transmission 12,000 front axle 19,000# 2-speed rear axle 50 gallon fuel tank Hydraulic brakes 11R22.5 tires 2” ball hitch AM... Contact Seller

National 666B 14-ton Boom Truck Crane

National: 666B Unit: 81415 Year: 2000 Serial Number: 19789 Ton: 14 Boom: 66′ Jib: 25′ Inserts: 1 Ball: Yesl Winches: 1 Engines: Cat 3126 Hours: 7,604.08 Milage: 63,034 FOB: Nashville, TN Price: Price on Request For More Information: Call Wayne Saul at 803-599-9569 Contact Seller

Ro Stinger TC 2857 14.4-ton Boom Truck Crane

Contact Us for more details. Contact Seller

1991 Simon-RO Unmounted TC145-45, 14.5-Ton, Boom Truck; CranesList ID: 219

Crane is Unmounted, 45’ 3 Section Full Power Boom, No Jib, Main Winch with 9/16” Wire Rope, Headache Ball, Anti Two-Block, Boom Rest, Dual Controls, Four A-frame Type Outriggers, No Power Take Off, Hydraulic Tank available - Subject To Confirmation, Except for needing a PTO this crane is ready to go to work, Make Best Reasonable Offer! http://www.CranesList.com LOCATED IN SOUTHERN CALIFORNIA! Contact Seller

15t National 562C Boom Truck Crane

National 500 C Series boom truck mounted on a GMC.  Contact Seller

National NBT15 15-Ton Boom Truck Crane

National Crane NBT15 Boom Truck, Mounted on a 2012 Navistar 4300, 2-man basket ready (BSAR), Equipped w/ air suspension driver seat, passenger bench, 30" solid bulkhead, remote controls, solid 18' wood bed.  Contact Seller

15t UNIC Revolution XL Boom Truck Crane

This is a very nice used 2016 Kenworth T370 truck with a REVOLUTION XL rider seat crane.  This is a light weight low profile 102' tip height crane that is mounted on a single axle 33,000 GVW truck with payload! It was designed with the operator in mind . . . quick & easy set-up. This crane has been in my fleet since new and has been well maintained.  CRANE: REVOLUTION XL Rider Seat by Smiley Lifting Solutions Low Profile Stowed Boom Adjustable Custom Operator's Seat  6-Sided Keeled Boom Design  102' Tip Height 15-Ton Capacity Paddle Controls True 2-Speed Winch w/ 12,000 lb. Single-Line Pull Truck Cab Winch Control for Securing Hook... Contact Seller

15t UNIC Revolution XL Boom Truck Crane

CRANE: New REVOLUTION XL Rider Seat by Smiley Lifting Solutions Low Profile Stowed Boom Adjustable Custom Operator's Seat  6-Sided Keeled Boom Design  102' Tip Height 15-Ton Capacity Paddle Controls or Joystick Controls True 2-Speed Winch w/ 12,000 lb. Single-Line Pull Truck Cab Winch Control for Securing Hook Continuous Rotation Full LMI Overload Protection w/ Operator's Display Anti-Two Block System Out & Down Outriggers w/ Upper Seat and Lower Ground Controls  Steel HD Deck Full Width Rear-Mounted Tool Box  Your choice of select colors 12-Month Parts/Labor Warranty TRUCK: New 2017 International 4300 300... Contact Seller

15t UNIC Revolution XL Boom Truck Crane

CRANE: New REVOLUTION XL Rider Seat by Smiley Lifting Solutions Low Profile Stowed Boom Adjustable Custom Operator's Seat  6-Sided Keeled Boom Design  102' Tip Height 15-Ton Capacity Paddle Controls or Joystick Controls True 2-Speed Winch w/ 12,000 lb. Single-Line Pull Truck Cab Winch Control for Securing Hook Continuous Rotation Full LMI Overload Protection w/ Operator's Display Anti-Two Block System Out & Down Outriggers w/ Upper Seat and Lower Ground Controls  Steel HD Deck Full Width Rear-Mounted Tool Box  Your choice of select colors 12-Month Parts/Labor Warranty Mounted on customer provided truck for $129,900.00... Contact Seller

15t UNIC Revolution XL Boom Truck Crane

This is a light weight low profile 102' tip height crane that is mounted on a single axle 33,000 GVW truck with payload! It was designed with the operator in mind . . . quick & easy set-up. The crane can be mounted on your choice of truck (which meets manufacturer's minimum specification requirements). CRANE: NEW REVOLUTION XL Rider Seat by Smiley Lifting Solutions Low Profile Stowed Boom Adjustable Custom Operator's Seat  6-Sided Keeled Boom Design  102' Tip Height 15-Ton Capacity Paddle or Joystick Controls True 2-Speed Winch w/ 12,000 lb. Single-Line Pull Truck Cab Winch Control for Securing Hook Continuous Rotation Full LMI Overload... Contact Seller

National 500C 15-Ton Boom Truck Crane

30,000 lb Capacity, 62 ft main boom with 24 ft jib, outriggers, 20 ft wooden deck, single man work platform, dual work stations, current state inspection and annual inspection stickers, 2 speed axle with split shifting, toolbox under bed, Ford Dsl Eng., 26,548 miles, machine in excellent condition, Contact Seller

JLG 1500JBT 15-Ton Boom Truck Crane

All glass good, seats, steering all good. Runs. 4 point hydraulic leveling jacks mounted on bed tires. 70-80%. Contact Seller

UNIC Revolution XL 15-Ton Boom Truck Crane

New REVOLUTION XL mounted on New 2018 IHC 4300 CRANE:  NEW REVOLUTION XL Rider Seat by Smiley Lifting Solutions Low Profile Stowed Boom Adjustable Custom Operator's Seat  6-Sided Keeled Boom Design  102' Tip Height 15-Ton Capacity Paddle or Joystick Controls True 2-Speed Winch w/ 12,000 lb. Single-Line Pull Truck Cab Winch Control for Securing Hook Continuous Rotation Full LMI Overload Protection w/ Operator's Display Anti-Two Block System Self-Leveling Out & Down Outriggers w/ Upper Seat and Lower Ground Controls  Steel HD Deck Hydraulic Oil Cooler Full Width Rear-Mounted Tool Box  Choice of Select Custom Colors... Contact Seller

UNIC UR-1543 15-Ton Boom Truck Crane (Unmounted)

New UNIC UR1543 Tractor Mount 15 ton Crane CRANE: UNIC 1543 Tractor Mount or Non-CDL single axle truck Unmounted crane kit 6-Sided Keeled Boom Design  53' Tip Height 15-Ton Capacity Continuous Rotation Overload Protection w/ function kick-out Hydraulic Out & Down Outriggers Hi-Speed Winch Anti-Two Block System Painted Red The UNIC 1543 crane is designed to be mounted on a tractor/trailer or it can be mounted on a non-CDL single axle truck.  The crane is priced as a ship-out (mounting is not included).  We can mount this crane on your truck at an additional cost. Financing is Available. For additional information, please contact George... Contact Seller

UNIC Revolution XL 15-Ton Boom Truck Crane

This is a light weight low profile 102' tip height crane that is mounted on a single axle 33,000 GVW truck with payload! It was designed with the operator in mind . . . quick & easy set-up. The crane can be mounted on your choice of truck (which meets manufacturer's minimum specification requirements). CRANE: NEW REVOLUTION XL Rider Seat by Smiley Lifting Solutions Low Profile Stowed Boom Adjustable Custom Operator's Seat  6-Sided Keeled Boom Design  102' Tip Height 15-Ton Capacity Paddle or Joystick Controls True 2-Speed Winch w/ 12,000 lb. Single-Line Pull Truck Cab Winch Control for Securing Hook Continuous Rotation Full LMI Overload... Contact Seller

2008 15-ton Elliott 1560F Boom Truck Crane

This crane is in immaculate condition with low hours and miles. Contact Seller

National 500D 16-Ton Boom Truck Crane

2001 National 500D - 4,700 hours 2001 International 4700 Mileage: 30,178 Contact Seller

16.5-t National 700B Boom Truck on International 76

National 700B Series Center Mount Crane Cummins ISM-370HP, Eaton 8LL, Hendrickson Suspension, 224"WB, 20K Front, 46K Rear, Double Frame, 425/65R22.5 Front Tires-80%, 11R24.5 Rear Tires-75%, (New Engine in 2012-Currently has 126K Miles/1300 Hours) Total Mileage: 223,579. Contact Seller

Terex BT3470 17-Ton Boom Truck Crane

2003 Terex BT3470 17-Ton Capacity 70' Boom 24'-40' Jib 1 Winch Enging: CAT 3126E 7-Speed Transmission 101,198 Miles 6,802 Hours 11R 22.5 Tires Anti-Two Block Kick Out Function Mounted on Ford F750 Great condition overall! Call 315-458-4101 for a quote. Contact Seller

USTC 1700JBT 17-Ton Boom Truck Crane

Mounted on Volvo 3-Axle Bobtail 70' 3-Section Boom 40' 2-Stage Jib Volvo 12 LTR, 380 hp Engine 2,700 Hours 46,660 Miles Eaton 9-Speed Transmission One Winch Block 6-Ton Swivel Ball Air Conditioning Contact Seller

Terex BT 3470 17-ton Boom Truck Crane on International 4700

Mounted on an International 4700 with a maximum tip height of 120' (36.6 m). Engine overhauled approximately 3 years ago.  $5K worth of new injectors. Transmission rebuilt. The hours and miles are approximations based on the engine being overhauled.  We have owned the crane since 2005 and all work and maintenance is performed in-house. The LMI needs to be replaced or fixed.  Crane works daily and is strictly used for sign work (lifting men and signs).  Contact Seller

National 600C 17-ton Boom Truck Crane

This truck and crane is well maintained and is in very good condition. The truck has 501,277 miles and has a 1999 Caterpillar motor.  The National crane has 7514.4 hours on and is certified 3rd party yearly. This truck and crane have been delivering wood trusses to homes. Theboom truck would still be in use daily if it weren't for the California Air Resource Board laws and regulations regarding diesel. This unit has been out of service since January 1 2018 due to the CARB laws. An out of state buyer is ideal. This unit is ready to work and we are sad to see it go. Price: $31,500.00 USD - Priced to Sell! For More Information, Contact Jennifer at 831-635-0377. Contact Seller

17t Manitex 1770C Boom Truck Crane

S/N: 119511, 18,042 miles, Ford F750 210 HP Cat diesel, 23' jib, 20' wood deck. Contact Seller