Terex STINGER 60100 Specifications

The genesis of the Terex 60100 Series, the Terex STINGER 60100 is also referred to as the Terex BT 60100 (behind the cab mount) or the Terex RM 60100 / Terex RS 60100 (rear mount) comes with an open seat operator's station or an enclosed crane operators cabin. 

This model is now branded as the Stinger 35-100 supported by Load King which now builds and supports previously branded Terex boom trucks and telescopic boom truck cranes. 

The 100 ft. (30.5 m) fully-proportional four-section telescopic “keel” boom come with an optional Easy-to-install 55 ft. (16.8 m) jib, man baskets, or work platform to increase job site flexibility.

Comes with easy-to-read Color-coded boom and load charts. Electronic load moment indicator and anti-two-block device, a 2-speed winch has a 15, 000 lb. (6, 804 kg) maximum line pull, 101 fpm (31 MPM) line speed, and an externally located planetary rotation drive for easy accessibility for maintenance, plus a 90 gal. (340 l) hydraulic tank.

Winch

Hydraulic winch with gear motor and planetary reduction gearing provides 2-speed “burst of speed” operation. The first layer rope pull is 15, 000 lbs. (6804 kg). Wire rope size is 5/8” (16 mm) with 45, 400 lbs. (20 593 kg) breaking strength.

Operating Speeds

Mainframe/turret assembly planetary rotation provides 180° rotation (370° with optional front bumper outrigger). Swing rotation is 56 seconds. Boom up/down is 42/32 seconds and boom extend/retract is 108/50 seconds.

Hydraulics

Three-section pump allows the operator to perform simultaneous crane operations (winch, boom and swing). Capacities are 36, 20, and 11 GPM (136.3, 75.7 and 41.6 lpm). The combined system capacity is 67 GPM (253.6 lpm).

Controls

Fully proportional, excellent metering characteristics for precise boom movements. Independent outrigger controls allow the crane to be stable and level in rigorous working conditions. Load Moment Indicating System has an audio alarm and functional shut down when the operator encounters an overload situation.

Outriggers

Front and rear outriggers are heavy-duty, out and down types. The front spread is 24 ft. 6 in. (7.47 m) for exceptional stability. The rear spread is 17’ 6” (5.33 m).

Subframe

Cross-braced, closed-box style subframe yields greater strength and rigidity. Wheelbase for standard truck crane mounting configuration is 261 in. (6.63 m).

Options

• Single and two-stage jibs
• Multi-part load blocks
• Auxiliary winch
• Spin-resistant load line
• Wood, steel, or extra heavy-duty steel flatbeds
• Radio remote controls
• One-man or two-man baskets
• Self-leveling work platform
• Winch drum tensioner
• Continuous rotation
• Oil cooler
• Rear bumper
• Single front bumper outrigger (required for continuous or 370° rotation on BT or RM models)
• Hydraulic hose reel  
• Hydraulic auxiliary tool circuit