Tadano GR150XL-1 15-Ton Rough Terrain Crane For Sale or Rent

• Boom: 6-section full power synchronized telescoping boom, 17.4-78’ of box construction with three sheaves. 
• Extension speed: fully extended in 52 seconds.
• Boom Elevation: By a double acting hydraulic cylinder with holding valve. Elevation -3° – 82°, combination of hand and foot controls. Automatic speed reduction and soft stop function. Boom angle indicator. 
• Jib: 2-stage extension type 11.8’- 18’ box type telescopes with 5°, 25° or 45° offset (tilt type). Stored under base boom section.
• Auxiliary Lifting Sheave: Single sheave, 8” root diameter at jib head. Mounted to main boom head for single line work. 
• Anti-two Block: Pendent type over-winding cut out device with audio-visual warning system.
• Swing: Hydraulic axial piston motor driven through planetary speed reducer. Continuous 360° full circle swing on ball bearing turntable @ 2.4 RPM. 
• Main Hoist: Grooved drum driven by hydraulic axial piston motor through winch speed reducer. Power load lowering and raising. Equipped with automatic brake (neutral brake) and counterbalance valve. Controlled independently of auxiliary hoist. Equipped with cable follower and drum rotation indicator. 
• Drum: Grooved 9-7/16” root diameter x 9-7/16” wide. 433’ of 7/16” diameter rope with a maximum line pull of 7,600 lbs. maximum line speed 406FPM.
• Auxiliary Hoist: Grooved drum driven by hydraulic axial piston motor through winch speed reducer. Power load lowering and raising. Equipped with automatic brake (neutral brake) and counterbalance valve. Controlled independently of main hoist. Equipped with cable follower and drum rotation indicator.
• Drum: Grooved 9-7/16” root diameter x 9-7/16” wide. 433’ of 7/16” diameter rope with a maximum line pull of 7,600 lbs. maximum line speed 406FPM
• Wire Rope: Warrington seal wire, extra improved plow steel, preformed, independent wire rope core, right regular lay. 7/16” 6x37 class max. Permissible line pull 6,500 lbs. 
• Hook Blocks: 15 Ton- weighted hook with swivel hook and safety latch for 7/16” wire rope. 2 ton – weighted hook with swivel and safety latch for 7/16” wire rope.
• Hydraulic Pump System: Two variable piston pumps for crane functions. Tandem gear pumps for steering, swing, and accumulator. Powered by carrier engine. Pump disconnect for crane is engaged/disengaged by rotary switch from operator’s cab. 
• Control Valves: Multiple valves actuated by pilot pressure with integral pressure relief valves.
• Reservoir: 45 Gallon (172 liter) capacity with external level gauge
• Oil Cooler: Air cooled fan type
• Cab and Operator Controls: Both crane and drive operations can be performed from one cab mounted on rotating superstructure. Left side mounted Cab: 1 man steel construction with sliding door access and tinted safety glass windows opening at side. Door window is powered control. Windshield glass and roof window glass are shatter-resistant. Tilt-telescoping steering column. Adjustable control lever stands for swing, boom hoist, boom telescoping, auxiliary hoist and main hoist. Control lever stands can change neutral positions and tilt for easy access into operator seat. 3-way adjustable operator’s seat with high back, headrest, and armrest. Engine throttle knob. Foot operated controls: boom hoist, boom telescoping, service brake and engine throttle. Cab equipped with Heat and Air Conditioning. Dash-mounted engine start/stop, monitor lamps, cigarette lighter, ashtray, drive selector switch, parking brake switch, steering mode select switch, outrigger controls. Full instrument panel including: torque converter oil temperature, engine water temperature, air pressure, fuel level, speedometer, tachometer, and hour meter.
• Tadano Electronic Load Moment Indicator (AML-L): Control lever lockout function with audible and visual pre-warning, Lift status indicator and Outrigger Status indicator,  Boom angle/ boom length/ jib offset angle/ load radius/ rated lifting capacities/ actual loads read out, Ratio of actual load moment to rated load moment indication,  Working condition register switch, Load radius/ boom angle/ tip height/ swing range preset functions
• Carrier Specifications: Rear engine, right hand steering, driving axle 2-way selected type by manual switch, 4x2 front drive, 4x4 front and rear drive.
• Frame: High tensile steel, all welded mom-box construction. 
• Transmission: Electronically controlled full automatic transmission. Torque converter driving full powershift with driving selector. 6 forward and 2 reverse speeds, constant mesh. Maximum travel speed 30.4 MPH
• Engine: Mitsubishi 4M50-TLA3B, 4 cylinder direct injection high output, turbo charge and after cooled diesel with 172 HP w/ exhaust brake. Equipped with 50 gallon fuel tank mounted right side of carrier. (TIER 3 FINAL)

Monthly crane bare rental available call for long term rates.