Stellar Industries Inc. 7621 3.50-Ton Service Truck Crane For Sale

Stellar TMAX1-11’ V2 Aluminum Mechanic Body

• Aluminum doors and side packs
• Torsion box understructure with isolated, steel crane compartment
• Master-Lock system
• 133” long
• 50” load bed width
• Six (6) recessed cargo tie-downs
• Two (2) rear mounted grab handles
• 12” fold down tailgate – painted black
• 21” step bumper with thru compartment
• Vise mounting plate – receiver workbench mount
• Step, slide out for TMAX mechanics work bench bumper
• Rubber fenderettes
• All compartments raised to 52” H x 22” D
• Overlapped doors on SS1V/CS1V and horizontal compartments
• 2 & 3 point stainless steel compression latches
• Stainless steel “Billet Style” hinges
• Spring loaded door stops
• Dual-seal automotive type compartment weather seal
• LED compartment lights
• SS1VF – Heavy duty aluminum drawer set – 35.5” H x 34” W x 18”D
  – 3-3”, 3-5”,1-7”
• SS1VR – Three (3) shelves with (3) dividers
• SS Horizontal – One (1) shelf with (3) dividers
• SS Rear – Three (3) shelves with (3) dividers
• CS1V – Divider kit with shelves and, 8” drop well. Oxy-Acetylene
  bottle holder holds 2 bottles
• CS2V – Three (3) shelves with (3) dividers
• CS Horizontal – Shelf with 3 dividers
• CS Rear – ½” x 50’ hose reel with roller guide – exits rear of body
• American Eagle 30P hydraulic driver compressor – produces 30 CFM at
  100 psi, 4-cylinder, single stage compressor, direct drive coupling,
  and hydraulic motor
• 21-gallon air tank kit
• FLR system – ¾” air feed for ½ hose reel (filter, lubricator, regulator)
• 20-gallon hydraulic reservoir – bulkhead mounted
• LED floodlights – Four (4) total. 1 on boom support, 1 SS behind
  compressor, 1 on each rear taillight box
• Backup alarm
• ICC safety kit – 2.5# fire extinguisher and reflector kit
• Spray-on bed liner for load bed walls and floors, and workbench
• Undercoated
• Prime painted white

Stellar 7621 telescopic crane             

• 44,840 ft/lb rated when in boost mode
• 7,500# maximum capacity at 5’10’ radius
• 21’ maximum hydraulic reach – 2,135# at 21’ when in boost mode
• Hexagonal boom – optimized to deliver dramatically less boom flex
  and side to side movement
• Boom elevation: -10° to 80°
• 400°non-continuous rotation – durable enclosed rotation system
  with a cast iron base and an internal mechanical stop
• Planetary winch with 100’ of 3/8” wire rope
• Max line pull speed 60ft/min
• Quick release snatch block stow
• Adjustable boom support, roller rest
• Proportional radio remote control – LCD features real time load
  capacity, maximum distance with the current load, boom angle, and
  percentage of load
• CDTplus boost mode allows for a momentary 18% increase in the
  capacity of the crane, and a Safe Mode to keep the crane and operator
  safe should a load indicating device fail to operate correctly 
• On-Demand speed control ramps engine RPM up only when the crane
  is being used. When crane is not used for 5 seconds engine RPM
  returns to idle. This lowers fuel consumption and reduces noise
  pollution in the work area
• Greasable pivot bushings, each pivot pin location includes bushings
  and grease zerks to provide for years of use
• Hydraulic stabilizers

2019 Chevrolet 5500 4x2

• 19,500# GVW
• 6.6L Duramax diesel engine
• Allison automatic transmission
• 84” CA, wheelbase 165”
• 40/20/40 split bench seat-vinyl
• Cruise control
• Air conditioning
• Power group
• Upgraded radio with Bluetooth
• Backup camera
• Chrome bumper and grille