P&H Cranes for Sale and Rent

P&H Specifications

P&H formally was a brand of rough terrain cranes, truck cranes, and crawler cranes based in Waverly, Iowa. P&H cranes were sold worldwide until they were acquired by Terex ... Show More
Sort By:
P&H 9125-TC Lattice Boom Truck Crane

P&H 9125-TC Lattice Boom Truck Crane For Sale

Location US
124 miles
Make P&H
Model 9125-TC
Tons 140.00
Year 1970

Price On Request

by Michels Machinery Co., Inc.

140 Ton, 200 Ft Boom, 60 Ft Jib, Cummins Engines, Fuller 9-Speed Transmission, 2 Drums, Load Moment Indicator, Radio Anti-Two Block, Block, Ball, Two Axle Boom Dolly.
P&H 9150-TC Lattice Boom Conventional Truck Crane

P&H 9150-TC Lattice Boom Conventional Truck Crane For Sale

Location US
124 miles
Make P&H
Model 9150
Tons 150.00
Year 1983

$100,000 USD

by Michels Machinery Co., Inc.

150 Ton, 130 Ft Boom, Cummins Engines, Eaton Fuller Transmission, Two Winches, 120 Ton Block, Independent Swing & Travel.
P&H T-400XL 40-ton Telescopic Boom Hydraulic Truck Crane

P&H T-400XL 40-ton Telescopic Boom Hydraulic Truck Crane For Sale

Location Richland, Washington US
1243 miles
Make P&H
Model T-400XL
Tons 40.00
Year 1984

$44,500 USD

by Brooker Crane Sales & Leasing

1984 P&H T-400XL, 40-ton hydraulic truck crane, 106’ main boom, two winches, Detroit diesel engine, Road Ranger transmission, 8 x 4 carrier, front hydraulic outrigger jack, air conditioning and heater, Auxiliary lifting sheave, hook block and ball. Hours: 4,422. Price is F.O.B. Houston, Texas.
1984 P&H Omega T-400 40-Ton Hydraulic Truck Crane; CranesList ID: 702

1984 P&H Omega T-400 40-Ton Hydraulic Truck Crane; CranesList ID: 702 For Sale

Location Texas US
417 miles
Make P&H
Model OMEGA T-400
Tons 40.00
Year 1984

$48,900 USD

by CranesList

1984 P&H Omega T400, 40 Ton, Hydraulic Truck Crane; CranesList ID: 702, 32.5'-106' Four Section Boom - Consisting of 1 base + 2 power sections + 1 manually pinned boom point which can be hydraulically extended or retracted with Auxiliary lifting Sheave, No Jib, Main and Auxiliary Winches with 3/4" Wire Rope, Planitary Gearing for power raising and lowering, Controlled Free Fall on both winches, Mechanical Boom Angle Indicator, Two Speed, Anti-Two Block, Hook Ball and Hook Block, 7,000# Counterweights, 9' 10" Wide 8 x 4 P&H Carrier, Detroit Diesel Engine,  Fuller Roadranger RT613, 13 Forward and 3 Reverse Speed Transmission...
P&H 790-TC 70-Ton Lattice Boom Truck Crane

P&H 790-TC 70-Ton Lattice Boom Truck Crane For Sale

Location Lancaster, Pennsylvania US
1165 miles
Make P&H
Model 790-TC
Tons 90.00
Year 1978

$38,000 USD

Was

$45,000 USD

by Steel Fab Enterprises, LLC

400 Cummins motors - lower & upper 200' of boom 62' of jib Full rigging box 15,459 miles Runs Near the Port of Baltimore for Shipping
1981 P&H Alpha 100 100-Ton Hydraulic Truck Crane; CranesList ID: 678

1981 P&H Alpha 100 100-Ton Hydraulic Truck Crane; CranesList ID: 678 For Sale

Location MX
1015 miles
Make P&H
Model ALPHA 100
Tons 100.00
Year 1981

$145,000 USD

by CranesList

1981 P&H Alpha 100, 100 Ton Hydraulic Truck Crane; CranesList ID: 678, 42' - 174' Five sections total consisting of a base section, 2 Full Powered Sections and one power extended and retracted pinned section with Auxiliary Lifting Sheave, 30' Swing-Away Lattice Jib with single sheave Off-Settable @ (0°, 12.5° or  25°), Detroit Diesel Engine UP - SUBJECT TO FINAL CONFIRMATION, Main Winch with 7/8" Wire Rope and Auxiliary Winch with 3/4" Wire Rope, Boom Length/Angle Indicator, Two Speed,  Anti-Two Block, Load Indicator,  Hook Ball and 50 Ton Hook Block, Roof Hatch in operator's cab, 9' 10" Wide 10 x 6 drive P...
P&H 670-TC 70-Ton Lattice Boom Truck Crane

P&H 670-TC 70-Ton Lattice Boom Truck Crane For Sale

Location Miami, Florida US
1322 miles
Make P&H
Model 670-TC
Tons 70.00
Year 1973

$11,999 USD

Was

$17,999 USD

by Executive Branch, LLC

P&H 670-TC 70-Ton Lattice Boom Truck Crane For Sale This crane was Certified thru 2021 for a project that is now complete.  Cummins engines.  27,000 & 12,000 lbs. counterweights, Low Miles!! Work Ready!! Boom/jib combination.  50' lattice boom 40' lattice boom 30' lattice boom 27' jib 21' jib Lower Truck Carrier stored in Miami Upper Superstructure, Counterweights, Boom, Jib, stored in Orlando at Southeastern Rigging
1978 P&H 790-TC 90-Ton Lattice Boom Truck, Crane CranesList ID: 584

1978 P&H 790-TC 90-Ton Lattice Boom Truck, Crane CranesList ID: 584 For Sale

Location GT
1587 miles
Make P&H
Model 790-TC
Tons 90.00
Year 1978

$56,500 USD

Was

$70,000 USD

by CranesList

1978 P&H 790TC, 90 Ton, Lattice Boom Truck, CranesList ID: 584, 120' Tubular pin connected Lattice Main Boom consisting of 1 x 20’ base, 1 x 20’ tip, 1 x 10', 1 x 20', 1 x 50' boom inserts, No Jib, Cummins Diesel Engine UP, Main and Auxiliary Winches with 7/8" wire Rope, Hook Ball, 90 Ton Hook Block, 11' Wide 8 x 4 P&H Carrier, Cummins 350 Big Cam Diesel Engine, Fuller Road Ranger Manual Transmission, Front and Rear Tires: 14:00 X 24 With 50% Left, http://www.CranesList.com, LOCATED IN GUATEMALA!
P&H 670-TC 70-ton Lattice Boom Conventional Truck Crane

P&H 670-TC 70-ton Lattice Boom Conventional Truck Crane For Sale

Location Pasco, Washington US
1234 miles
Make P&H
Model 670-TC
Tons 70.00
Year 1974

Price On Request

by Lampson International

P&H 70-ton 670-TC Lattice Boom Truck Crane for Sale 2 DRUM CRANE TUBULAR BOOM AS IS WHERE IS Contact Us for Current Hours and Miles Owned Since New Includes Full Service and Maintenance History
P&H 670-TC 70-ton Lattice Boom Truck Crane

P&H 670-TC 70-ton Lattice Boom Truck Crane For Sale

Location Pasco, Washington US
1234 miles
Make P&H
Model 670-TC
Tons 70.00
Year 1973

Price On Request

by Lampson International

P&H 670-TC LATTICE BOOM TRUCK CRANE WITH HYDRAULIC OUTRIGGERS 2 DRUM CUMMINS UPPER / LOWER ALL GLASS IS GOOD AS IS WHERE IS
P&H T-650 65-ton Telescopic Boom Truck Crane - CranesList ID: 575

P&H T-650 65-ton Telescopic Boom Truck Crane - CranesList ID: 575 For Sale

Location GT
1587 miles
Make P&H
Model T-650
Tons 65.00
Year 1969

$65,000 USD

by CranesList

1969 P&H T650, 65 Ton, Hydraulic Truck Crane, CranesList ID: 575. 33'-105' Four Section Boom - Consisting of Base and Three Hydraulically Extended and Retracted Sections, 27' - 45' Telescoping Jib, Detroit 6V71 Six-Cylinder Diesel Engine, Main and Auxiliary Winches With 3/4" on Main and 1/2" on Auxiliary Wire Rope, Anti-Two-Block, Hook Ball, 65 Ton Five Sheave Hook Block,  12,000# Power removable Counterweights, 9' 10" Wide 8 x 4 P&H Carrier, Cummins 350 Big Cam, With Jake Brake, Fuller Manual Five Speed Forward, One Speed Reverse Transmission, Front And Rear Tires: 14:00 x 20 - 18 Ply with 50-60% Left...
1967 P&H 780-TC 80-Ton Lattice Boom Truck Crane; CranesList ID: 106

1967 P&H 780-TC 80-Ton Lattice Boom Truck Crane; CranesList ID: 106 For Sale

Location Colorado US
447 miles
Make P&H
Model 780-TC
Tons 80.00
Year 1967

$23,500 USD

Was

$27,500 USD

by CranesList

1967 P&H 780TC Lattice Boom Truck Crane; CranesList ID: 106, 180' 6 Section Tubular Boom consisting of 1 x 25' Butt. 1 x 25' Tip, 1 x 20',  2 x 30', 1 x 50' Inserts,  40’ Jib with Pins and Pendants consisting of 1 x 10' Butt. 1 x 10' Tip, 1 x 20' Insert (20' insert is damaged),  Cummins Diesel Engine Up (Friction Brake),  Main and Auxiliary Winches,  7/8” 680' Wire Rope (Main), 3/4” 465' Wire Rope (Auxiliary),  5 Sheave Miller High Lift Hook Block,  Hook Ball,  11' 2" Wide 8 X 4 P&H Carrier,  Cummins NTC 350 Diesel Engine Lower,  Fuller Manual Transmission,  ...
1985 P&H T-1000 100-Ton Hydraulic Truck Crane; CranesList ID: 100

1985 P&H T-1000 100-Ton Hydraulic Truck Crane; CranesList ID: 100 For Sale

Location MX
1015 miles
Make P&H
Model T-1000
Tons 100.00
Year 1985

Price On Request

by CranesList

164' (5 sections total) - 4 Sections 132' Full-Power and 1 Section 42' Power Pin Boom w/ Auxiliary Lifting Sheave, 60' - 4 x 15' Lattice Inserts Swing-Away Jib Off-Settable @ (0°, 25°), Detroit Diesel Engine UP, Main Winch, Drum Rotation Indicator, Electric boom Angle Indicator, 2-Speed, Anti-Two Block, Load Indicator, 3/4” Wire Rope, 80-Ton 5-Sheave Johnson Hook Block, 7-Ton Johnson Hook Ball, Roof Hatch in operator's cab w/ windsheild wiper, Working flood light on operator's cab, 11' Wide 8 x 4 drive P&H 9150 Carrier, Cummins Diesel Engine w/ Jake Brake, 13-Speed Eaton Fuller Manual Transmission, Front and Rear...
P&H T-250 25-ton Telescopic Truck Crane

P&H T-250 25-ton Telescopic Truck Crane For Sale

Location Missoula, Montana US
1036 miles
Make P&H
Model T-250
Tons 25.00

$21,500 USD

by NW Machinery

Call for Details.

P&H OMEGA T-450

(Cranes, Hoists & Material Handlers : Truck Cranes)

P&H OMEGA T-450 Specifications

P&H T-650

(Cranes, Hoists & Material Handlers : Truck Cranes)

P&H T-650 Specifications

P&H T-200

(Cranes, Hoists & Material Handlers : Truck Cranes)

P&H T-200 Specifications

P&H ALPHA 100

(Cranes, Hoists & Material Handlers : Truck Cranes)

P&H ALPHA 100 Specifications

P&H 435-TC

(Cranes, Hoists & Material Handlers : Truck Cranes)

P&H 435-TC Specifications

P&H 440-TC

(Cranes, Hoists & Material Handlers : Truck Cranes)

P&H 440-TC Specifications P&H 440-TC Specifications

P&H 430A-TC

(Cranes, Hoists & Material Handlers : Truck Cranes)

P&H 430A-TC Specifications

P&H T-600XL

(Cranes, Hoists & Material Handlers : Truck Cranes)

P&H T-600XL Specifications

P&H OMEGA T-250

(Cranes, Hoists & Material Handlers : Truck Cranes)

P&H OMEGA T-250 Specifications

P&H 670-TC

(Cranes, Hoists & Material Handlers : Truck Cranes)

P&H 670-TC Specifications P&H 670-TC Specifications P&H 670-TC Specifications

P&H 6250-TC

(Cranes, Hoists & Material Handlers : Truck Cranes)

P&H 6250-TC Specifications P&H 6250-TC Specifications

P&H 650A-TC

(Cranes, Hoists & Material Handlers : Truck Cranes)

P&H 650A-TC Specifications

P&H 790-TC

(Cranes, Hoists & Material Handlers : Truck Cranes)

P&H 790-TC Specifications P&H 790-TC Specifications

P&H T-300

(Cranes, Hoists & Material Handlers : Truck Cranes)

P&H T-300 Specifications

P&H T-400XL

(Cranes, Hoists & Material Handlers : Truck Cranes)

P&H T-400XL Specifications

P&H T-250

(Cranes, Hoists & Material Handlers : Truck Cranes)

P&H T-250 Specifications

P&H 9125-TC

(Cranes, Hoists & Material Handlers : Truck Cranes)

P&H 9125-TC Specifications P&H 9125-TC Specifications P&H 9125-TC Specifications

P&H 9150

(Cranes, Hoists & Material Handlers : Truck Cranes)

P&H 9150 Specifications P&H 9150 Specifications

P&H T-750

(Cranes, Hoists & Material Handlers : Truck Cranes)

P&H T-750 Specifications P&H T-750 Specifications P&H T-750 Specifications P&H T-750 Specifications P&H T-750 Specifications

P&H CENTURY T-280

(Cranes, Hoists & Material Handlers : Truck Cranes)

P&H CENTURY T-280 Specifications

P&H CENTURY T-500

(Cranes, Hoists & Material Handlers : Truck Cranes)

P&H CENTURY T-500 Specifications

P&H formally was a brand of rough terrain cranes, truck cranes, and crawler cranes based in Waverly, Iowa. P&H cranes were sold worldwide until they were acquired by Terex in 1995. Komatsu still manufacturers mining shovels under the P&H brand name. Load King recently acquired the Terex Telescopic Boom Truck Crane Product line up which still today has deep roots from the original P&H brand of truck cranes.

So who services and still supports P&H cranes to keep your machine working?

As the top supplier of P&H parts, Crane Market users rely on Jefferson Machine Company who sells O.E.M. P&H crane parts. They stock hard-to-get P&H crane parts, including new, rebuilt, or used crane parts. Other crane manufacturer parts are available as well. 24/7 field service and shop service is available.

  • Crane parts are shipped globally.
  • Crawler crane parts, truck crane parts, lattice crane parts, dragline crane parts, and many others.
  • Jefferson Machiners has a large supply of new and used crane parts in inventory.
  • Non-inventoried can be made in our manufacturing facility with quick delivery.
  • Complete crane and dragline rebuild service available.
  • 24/7 field service for crane repair.
  • Expedient crane parts delivery.
  • We manufacture a wide range of parts and stock frequently needed "off-the-shelf" crane parts.
  • We also manufacture new or rebuild crane booms.
  • Below is a brief summary of some of the P&H crane models for which we can supply parts. We are not limited to these models, so please contact us if you need a part or repair for any type of P&H crane.

P&H 155, 218, 250, 300T, 320H, 325TC, 430ATC, 430TC, 435TC, 440TC, 5100, 5150R, 5300R, 535, 545TC, 550, 585BTC, 645, 650, 650ATC, 650TC, 660TC, 670TC, 6250, 6250TC, 790, 790BTC, 790TC, 8100TC, 8115TC, 855BG-3, 890, 9125, 9125TC, 9150TC, 9170TC, C120, C165, CN122, CN122D, CN128, CN165, CN190, CNT280, CNT350, CNT650, CNT750, D85I, Omega15, Omega 18, omega 20, Omega 25, Omega 40, Omega 50, Omega T300, R-200, S20, S35, S75, T200, T250, T250, T300, T300A, T350, T400, T400XL, T500, T600a, T650, T750, TC15, WA350, 1015, 1055