Altec AC25-95B Cranes for Sale and Rent
Altec AC25-95B Specifications
The Altec AC25-95B has a 25 ton (22t) Maximum Lifting Capacity, a 95 ft (29 m) 4-Section Boom, 3 Position Out-and-Down Outriggers, Walk Through Control Stations , and a Typical Finished Weight of 50, 000 lbs (22, 679 kg).
STANDARD SAFETY FEATURES
• LMAP (Load Moment & Area Protection) System
• Rated Capacity Limiter • Displays: Boom Length, Boom Angle, Load on Hook, Percent of Rated Capacity
• Electronic Working Area Definition
• Operator Defined Audible Alarm Set-Points for Boom Angle, Length and Rotational Position
• Outrigger Boom Interlock System
• Outrigger Motion Alarm
• Back-Up Alarm
• Emergency Stop at Operator Controls
• Winch Drum Rotation Indicator
• Anti-Two Block Device
• Front Bumper Outrigger
• Walk-Through Control Stations
OPTIONS
• 1-Piece 26 ft (7.9 m) Jib
• 2-Piece 44 ft (13.4 m) jib, 26 ft (13.4 m) Retracted
• 2-Man Steel Platform • 370 Degree Non-Continuous Rotation
• Continuous Rotation
• 12, 000 lb (5, 443 kg) 2 Speed Winch
• Hydraulic Tool Circuit at Tail Shelf
• Hydraulic Tool Circuit at Boom Tip
• Rotation Resistant Wire Rope
• Winch Control at Load Hook Stow Point
• Hydraulic Oil Cooling System
CRANE SPECIFICATIONS
• 50, 000 lb (22, 679 kg) Maximum Lifting Capacity
• 95 ft (29 m) 4-Section Boom
• 105 ft (32 m) Maximum Sheave Height
• Stowed Travel Height of 13.25 ft (4.04 m)
• Vehicle Travel Length of 39.9 ft (12.1 m)
• 3 Position Out-and-Down Outriggers
• Full Span 18.5 ft (5.6 m)
• Mid Span 14 ft (4.3 m)
• Short Span 9 ft (2.7 m)
• Hydraulic Pilot-Operated Control System
• 12, 000 lb (5, 443 kg) Winch w/ Burst of Speed