Aspen Aerials A-75 Specifications
The Aspen Aerials A-75 is the longest reaching bridge inspection aerial lift with a 75’ maximum horizonta reach. Not only is it the largest unit available, but... Show More
The Aspen Aerials A-75 is the longest reaching bridge inspection aerial lift with a 75’ maximum horizonta reach. Not only is it the largest unit available, but also has the greatest inspection platform capacity, a full 700 lbs. A telescoping 4th boom enables inspectors to access behind the deepest bridge girders.
The A-75 is fitted with stabilizing systems which allow operators the advantage of being able to move the truck while the platform is deployed. As with all Aspen Aerial units, OUTRIGGERS ARE NOT REQUIRED.
-
A full-length subframe provides strength and stability.
-
Axle locks unitize the chassis and truck axles.
-
A counterweight at the base of the pedestal rotates with the unit, always staying within the width of the chassis.
-
A hydraulically sliding counterweight is installed under the truck so that the weight can be positioned in the most optimum counterbalanced position.
-
An interlock system tied to the controls maintains operation within the unit's full range of stability.
-
An indicator panel at the pedestal enables operators to constantly monitor boom and turret movements.
As the most advanced microprocessor control system available, the “Plus 1” Graphical Terminal Interface includes a color display depicting unit operation and individual function performance while monitoring the unit’s parameters, hydraulics and enabling simple troubleshooting.
-
Controls, with wireless capabilities, are included at both operator stations. A communication system is also provided with speakers in the cab, at the turntable, and in the platform. The platform station operates in the “hands-free” mode.
Two rotating turntables plus multiple articulating and telescoping booms allow platform to deploy off of either side of the truck to access all of your structures. Turntable number two comes equipped with a leveling system, providing smooth platform movement. In addition, the operator can make manual adjustments of +/- 5 degrees to compensate for the super-elevation of the bridge. Without the requirement for leveling arms, the A-75 offers the latitude to clear fences up to 11 feet high.
-
The Aspen A-75 has the capability of providing inspectors with over 16' of vertical reach through the use of its telescopic 4th boom section. This fully hydraulic feature will enable you to get up and behind your deepest girders for a close-up inspection.
-
The added flexibility of a 180 degree rotating platform makes maneuvering into working positions easy, increasing productivity and efficiency.
Four articulating booms and two turntables give the Aspen A-75 the ability to operate in, around, through and over all types of obstructions. The Aspen A-75 can be deployed, reaching across your widest sidewalks and over high fences to gain access to underbridge areas. Because the vehicle can be moved while the platform is under the bridge, the Aspen A-75 provides even greater range and operating efficiency
Specifications
pecifications:
- Horizontal Under Bridge Reach: 75’
- Vertical Reach Down:72’
- 4thTelescoping boom: 16’
- Overhead Vertical Reach Up: 53’
- Fence Clearance: 10’
- Sidewalk Clearance:12’6”
- Rotation Range of Turret 1: 270 degrees
- Rotation Range of Turret 2: 180 degrees
- Deploys on Both Sides
- Registered Weight: 79, 000 lbs (39.5 Tons)
- Front axle to Rear axle spacing: 35’7”
- Total Length: 43’
- Total Height: 13’
Features:
- 700 lbs Bucket Capacity
- Heated Bucket Platform
- Inspection Lights
- Axle Locks
- No Outriggers or External Stabilizers
- Basket Size (Two Person Basket): 40” x 60” x 42”
- Three sets of controls: one set in the platform, one remote set, one set at the pedestal.
- Sloped indicator alarm