Altec L36A Specifications

The Altec L36A is a versatile articulating overcenter aerial service vehicle that does not require outriggers. The Working Height is Up to 41 ft (14.3 m) and it has a 400 lb (181 kg... Show More

Altec L36A

(Platform Aerial Lifts, Bucket Trucks & Digger Derricks : Bucket Truck Aerial Platforms)

Altec L36A Specifications Altec L36A Specifications

The Altec L36A is a versatile articulating overcenter aerial service vehicle that does not require outriggers. The Working Height is Up to 41 ft (14.3 m) and it has a 400 lb (181 kg) Platform Capacity Bucket with a side reach of 28.4 ft (8.7 m).

General Specifications:
Ground to Bottom of Platform*: 37.3 ft (11.4 m)
Maximum Reach, Overcenter: 28.4 ft (8.7 m)
Boom Articulation (Lower Boom): 0 to 107°
Rotation: Continuous
Standard Features:
  • Altec ISO-Grip® Control System
  • Overcenter Articulating Aerial Device
  • Insulating, ANSI Category C, 46 kV and Below
  • Lower Boom Insulator
  • Walking Link Articulation of Upper Boom
  • Continuous Rotation
  • Lower Boom Articulation 107°
  • Upper Boom Articulation Up to 270°
  • Side-Mounted Platform 24 x 30 x 42 in (610 x 762 x 1067 mm)
  • Full Pressure, Open Center Hydraulic System
  • Hydraulic Tool Circuit at Boom Tip
  • Outrigger Boom Interlock System (with Outrigger Option)
  • Outrigger Motion Alarm (With Outrigger Option)
  • Back Up Alarm
Optional Features:
  • Diagnostic Pressure Test Kit
  • Secondary Stowage System
  • Engine Start/Stop
  • Lower Boom Lifting Eye
  • Outriggers, Modified A-Frame
  • Platform Cover and Liner
  • Single Handle Control
  • Throttle Control
  • Tool Circuit at Tailshelf
  • Altec Platform Load Monitoring Available on Select Models
Recommended Features:
  • Fall Protection System
  • Platform Liner
  • Wheel Chocks
  • Outrigger Pads (With Outrigger Option)