National 14127H 33-Ton Un-Mounted Boom Truck Crane For Sale

NATIONAL 14127H−1400H SERIES CRANES

FEATURES
NATIONAL CRANE 1400H
• 29,9 t (33 USt) maximum capacity
• 50,3 m (165 ft) maximum vertical reach*
• 41,15 m (135 ft) maximum vertical hydraulic reach

FIVE-SECTION BOOM
• At 38,72 m (127 ft), the Series 1400H five-section boom is the longest in its size range. The long boom allows the operator to perform more lifts without the use of a jib, reducing setup time and improving efficiency. A 30,5 m (100 ft) four-section boom or a 21,03 m (69 ft) four-section boom is also available.

EASY GLIDE BOOM WEAR PARTS
• Easy Glide boom wear pads reduce the conditions that cause boom chatter resulting in smoother crane operation.

OVERLOAD PROTECTION
• All National Crane boom trucks are equipped with overload protection. A Load Moment Indicator (LMI) is standard on all Series 1400H machines. The LMI display console is weatherproof. The LCD display is visible in full or low light and displays all crane load lifting values simultaneously.

OUTRIGGERS
• Mainframe outriggers are crossframe H-style, with 7,47 m (24 ft 6 in) span, with a mid-span setting of 5,64 m (18 ft 6 in). Rear stabilizers are H-style with 5,64 m (18 ft 6 in) span. Removable ball and socket aluminum outrigger pads are included on mainframe outriggers.

BEST IN CLASS PERFORMANCE AND SERVICEABILITY
• The stronger standard torsion box improves rigidity, reduces truck frame flex and reduces the need for counterweight
• Speedy-reeve boom tip and sheave blocks simplify rigging changes by decreasing the time needed to change line reeving
• Crane components painted before assembly reduce the chance of rust, improve serviceability and enhance the appearance of the crane
• Internal anti-two block wiring standard on the 1400H routes the wiring through the inside of the boom eliminating the possibility of snagging the wire on obstructions
• Bearings on the boom and retract cables can be greased through access holes in the boom side plates and number of internal boom parts has been reduced improving serviceability
• The Series 1400H is supplied with 375° non-continuous rotation standard
• Adjustable swing speed comes standard on the 1400H. A control knob located on the swing motor brake release valve can be easily adjusted to the crane operator’s swing speed preference
• Radiator mounted on truck frame with electric fan is standard

MOUNTING CONFIGURATION
The mounting configuration shown is based on the Series 1400H with an 85% stability factor. The complete unit must be installed in accordance with factory requirements and a test performed to determine actual stability and counterweight requirements since individual truck chassis vary. If bare truck weights are not met, counterweight will be required. Chassis must be equipped with a front frame extension suitable for SFO addition.

ACCESSORIES
RADIO REMOTE CONTROLS
• Eliminate the handling and maintenance concerns that accompany cabled remotes. Operate to a range of about 76 m (250 ft), varying with conditions.

HEAVY-DUTY PERSONNEL BASKET
• One and two-person baskets for main boom and jib are available.

*Maximum vertical reach is ground-level to boom tip height at maximum extension and angle with outriggers/stabilizers full extended.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.