Citing increased demand for topless flat top tower cranes, Manitowoc recently unveiled its largest Potain topless model to date at Bauma.

“Over the past 10 years we’ve seen consistent growth in demand for topless cranes, with customers benefiting from their fast assembly and compact design, which makes it easier to get more cranes onto a job site to complete work quicker,” says Thibaut Le Besnerais, global product director for tower cranes. “Alongside this, we’ve seen an increase in modular construction, with contractors needing to lift heavier loads…We wanted to be sure that any new model we launch not only satisfied demand for greater capacity but also preserved the easy transport, fast assembly and industry-leading performance our other topless cranes deliver. The MDT 809 provides all that and more.”

According to Equipment World, with 40 tons of lift capacity and the ability to accommodate up to 80 meters of jib, the MDT 809 can transport in either 10 or 11 containers, Manitowoc says, which is four to five fewer containers typically required of a crane this size.

Once on the job site, Manitowoc says the crane assembles twice as fast as other 40-ton cranes while requiring less space. The company says with the full complement of jib, the MDT 809 can be assembled at a working height of 50 meters in less than three days.

Aiding in the assembly are dedicated slinging points and jib sections that can be assembled either on the ground or in the air.

Here’s Manitowoc’s breakdown on the MDT 809’s performance options:

From the range of regular frequency-controlled hoists, options for the crane span from the 100LVF to the 270LVF. An optional 150HPL is also offered, from the High-Performance Lifting range, for the ultimate in speed and strength. These winch options give the crane a maximum available capacity of 25 t, 32 t or 40 t. Tip loads of up to 9 t are available at the 80 m maximum. With the new reinforced K-mast system, freestanding heights of up to 80 m are possible.

Users can choose from a two-fall configuration on the trolley for faster duty-cycle lifting, or four-falls for heavy lifting. Inside the cab a simple push-button solution enables the operator to activate the cable-tensioning system automatically. This is particularly useful for long-running job sites, where tensioning is required more frequently. The Crane Control System (CCS) features too, with its customizable operator profiles; simpler commissioning; load curve P+ functionality and much more

Wayne Grayson | April 23, 2019

The new Potain MDT 809 Series Flat Top Tower Crane Series



Discover CraneMarket's great selection of cranes, crane equipment & parts.
e.g. Down Cab Cranes for Sale and Rent

Let's finish your next project together! Find out how we can help you.
e.g. Lattice Boom Cranes for Sale and Rent